Warenkorb 0

ALL FINISHED REPAIRS CAN BE FOUND IN THE GALLERY.

ANOTHER BASKET CASE ENYA 15D FOR RESURRECTION
This engine was acquired by us in a trade me purchase of junk engines, just ripe for resurrection.
VIEW PROGRESS
VINTAGE R.G.U. BASKET CASE ENGINE FOR RESTORATION.
My good friend Peter Valicek has sent us in this basket case R.G.U. engine and a bunch of extra parts with the friendly challenge to not just restore the engine but significantly improve the performance, and, see what we can come up with to do with the extra parts.
VIEW PROGRESS
VINTAGE WILO 1.49 cc DIESEL WRECK
Our good friend in the Netherlands sent us in this wreck of an engine to see what we could do with it. Well lets see what can be done.
VIEW PROGRESS
SOMEWHAT RARE I.O.R 2.5cc DIESEL FROM ROMANIA CIRCA 1958
This engine was purchased in an estate sale and will be fully restored to like new as far as is possible.
VIEW PROGRESS
RAWLINGS R30 REBUILD
This rare engine was sent in by a client in Australia with the request to please add the compression back into it and do what ever else is needed.
VIEW PROGRESS
VINTAGE WOHM DIESEL RADIAL
This engine was sent in to us by my good friend Wolfgang Hoepfner with the request to "please restore it to like new condition" Sure mate no problem.
VIEW PROGRESS
RARE TYPHOON 10cc RACE MOTOR RESTORATION
This engine was acquired in an estate sale and will be going under the knife for a full blown restoration
VIEW PROGRESS
HOPE 19 RESTORATION
This very sad little Hope 19 engine came to us through a second hand purchase and was certainly not looking very hopeful. Lets see what can be done to sort him out.
VIEW PROGRESS
HUSICKA 2.5cc DIESELS
These 2 rather rare engines were sent in from my good friend Callum Agnew for a complete restoration rebuild. We will do both these engines together.
VIEW PROGRESS
O.S. 15 DIESEL REBUILD
A derilect old O.S. 15 diesel in desperate need of resuscitation gifted to me by my friend Trevor Henderson, thanks mate.
VIEW PROGRESS

Reparaturen und Dienstleistungen

Our services with pricing in New Zealand Dollars are as listed below :

1/ Rebores  from $250

2/ New crankshafts from $150

3/ New con rods from $35

4/ Engine assessment and cleaning $65 per engine up to 3 engines, then $40 per engine for       4 or more engines in one job lot.

5/ Crankcase welding, Costed on a per job basis

6/ Full restorations of all vintage and nostalgic model engines (I.C. only)

7/ Full foundry and pattern making services.

8/ Anodising service

9/ Custom engine building

10/ Machine shop work.