TAIPAN TYRO NATURAL FINISHED DIESEL REBUILD

Here's the engine as it was received from Mr Henderson.

And completely dismantled for assessment.

Again we will remove the main bush from the case and apply our restorative measures to the plain case before starting to rebuild the rest of the engine.

Here's the cleaned up case with most of the damage rectified and ready for the rest of the parts to be applied. We'll start with the back plate and N.V.A.

Now it's on with the show.

We have managed to get the cylinder head all nicely cleaned up and ready to refit once the rest of the engine has caught up with it.

Now let's get on with rebushing the case.......

Out with the old, then we'll make and fit the new....

Here we have the new crankshaft bush made and fitted to the case, intake hole re drilled and sized for the original crankshaft. We have also cleaned up the original prop driver and made and fitted a new prop washer and nut.

Here we have the back plate and needle assembly all sorted and resembled onto the engine.

Here's the cylinder head assembly all finished and ready to refit to the engine and also the cylinder liner all cleaned up and ready to relap for a new piston and contra.

Now it's onto the new con rod.