ETA 15 CUSTOM BUILD PROJECT

This is a parts engine that I found on eBay and thought that it could do with a bit of the F.R.V. rebuild treatment.

PARTS AS RECEIVED:

Photos below show the case parts made and test fitted to the original main case

Photos below show the crankshaft and prop driver assembly made and ready to fit.

Test assembly of the shaft to the case etc

Photos below show the finished bottom end assembly final assembled and ready for the cylinder liner and head to be fitted. I have also made and fitted the venturri assembly complete barring the needle.

This photo shows the finished cylinder head and compression screw with the modified ported crankshaft ready to assemble onto the engine

Next is to clean and final assemble the engine and do a test run.

Propped up and ready to test run